Troubleshooting The Storage System; I Can't Access The Manager; I Forgot The Password For Logging In To The Manager - Intel SS4000-E Troubleshooting Manual

graded mode
Disk error -- storage
60018 Critical
must be repaired
Unsupported USB de-
60021 Warning
vice [%1] detected
Password changed for
60221 Warning
backup client [%1]
Backup image for [%1]
60222 Warning
removed
Failed to adjust
60025 Warning date/time with time
server [%1]

Troubleshooting the Storage System

This section provides general information about common problems that
you might have with your storage system and steps you can take to re-
solve them.

I can't access the Manager

If you're using the Console, make sure the computer where the Console
is installed is in the same subnet as the storage system.
If you're using a Web browser, make sure the name or IP address of the
storage system is correct. You can use the storage system name only if
that name is registered with a DNS server in your network. In addition, if
you configured the storage system to use a specific IP address, you
might need to specify the IP address of the gateway in your network
before you can successfully access the Manager using a Web browser.
First access the Manager using the Console and then specify the gate-
way address and try to access it using a Web browser.

I forgot the password for logging in to the Manager

You can reset the storage system to use its original administrator user
name (admin) and password (storage) by pressing the small, recessed
reset button on the back of the storage system.
Note: This also resets the storage system to its original network settings. If
aged
One or more disks in the
RAID is/are broken and
cannot be recovered
Non-disk type of USB de-
vice is connected to the
USB connections
Password has
changed
Backup image for the cli-
ent machine has been
removed
Unable to communicate to
the time server.
disks repaired
Please contact your disk
manufacture
disks repaired
Make sure you only connect
USB type of disk or flash
memory to the USB con-
nections, and one port one
device.
Make sure the password
been
change is an intended ac-
tion
Make sure deleting backup
image is an intended action
Make sure the time server
is up and running and the
network connection is good.
to get the