Removing the solid-state drive (half-length)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the
battery (half-length)
Procedure
1
Remove the screw (M2x3) that secures the solid-state drive assembly to the system board.
2
Lift and slide the solid-state drive assembly from the system board.
Figure 11. Removing the solid-state drive assembly
1
screw
computer. After working inside your computer, follow the instructions in
or the
battery
(full-length).
www.dell.com/
2
solid-state drive assembly
Removing the solid-state drive (half-length)
13
After working inside
27