Replacing The Wireless Card; Procedure - Dell XPS 15-9570 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

• Post-requisites
Procedure
CAUTION: To avoid damage to the wireless card, do not place any cables under it.
1 Align the notch on the wireless card with the tab on the wireless-card slot and slide the card into the slot.
2 Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card
supported by your computer:
Table 2. Antenna-cable color scheme
Connectors on the wireless card
Main (white triangle)
Auxiliary (black triangle)
3 Align the screw hole on the wireless-card bracket with the screw-hole on the wireless card.
4 Tighten the captive screw that secures the wireless-card bracket to the wireless card.
38

Replacing the wireless card

Replacing the wireless card
computer. After working inside your computer, follow the instructions in
Antenna-cable color
White
Black
20
After working inside
www.dell.com/