Dell XPS 15-9570 Service Manual page 91

Table 12. System setup options—Intel Software Guard Extensions menu
Intel Software Guard Extensions
Intel SGX Enable
Enclave Memory Size
Performance
Multi Core Support
Intel SpeedStep
C-States Control
Intel TurboBoost
HyperThread control
Power Management
AC Behavior
Auto on Time
USB Wake Support
Wake on LAN
Block Sleep
Peak Shift
Advanced Battery Charge Configuration
Primary Battery Charge Configuration
POST Behavior
Adapter Warnings
Keypad (Embedded)
Num lock Enable
Enable or disable Intel Software Guard Extensions (SGX).
Set the Intel SGX enclave reserve memory size.
Enable multiple cores.
Default: Enabled.
Enable or disable the Intel SpeedStep technology.
Default: Enabled.
NOTE: If enabled, the processor clock speed and core voltage are adjusted
dynamically based on the processor load.
Enable or disable additional processor sleep states.
Default: Enabled.
Enable or disable Intel TurboBoost mode in the processor.
Default: Enabled.
Enable or disable hyper-threading in the processor.
Default: Enabled.
Enables the system to power-on automatically, when an AC power adaptor is
connected.
Enable to set the computer to turn on automatically every day or on a pre-selected
date and time. This option can be configured only if the Auto On Time is set to
everyday, weekdays, or selected days.
Default: Disabled.
Enable the USB devices to wake the computer from standby mode.
Enable the LAN signal to wake the computer from standby mode.
NOTE: This feature only works when the computer is connected to an AC
power adaptor.
Enable or disable the sleep state.
Configure the AC power usage.
Enable from the beginning of the day to a specified work period.
Set the primary battery charge setting with a pre-selected custom charge start and
stop.
Default: Adaptive.
Enable or disable adapter warnings.
Default: Enabled.
Enable or disable the keypad that is embedded in the internal keyboard.
Enable or disable the numeric lock—numlock.
Default: Enabled.
System setup 91