Replacing The Audio Daughter-Board; Procedure; Post-Requisites - Dell XPS 15-9570 Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1 Align the connector on the audio daughter-board with the connector on the system board and snap it into place.
2 Replace the two screws (M2x3) that secures the audio daughter-board to the system board.
Post-requisites
1 Replace the system-board
2 Replace the memory modules.
3 Replace the heat sink.
4 Replace the fans.
5 Replace the solid-state drive (half-length)
6 Follow the procedure from step 3 to step 6 in
7 Replace the wireless card.
8 Replace the battery (half-length)
9 Replace the base cover.

Replacing the audio daughter-board

computer. After working inside your computer, follow the instructions in
assembly.
or the solid-state drive
"Replacing the hard
or the battery (full-length).
(full-length).
drive".
Replacing the audio daughter-board
28
After working inside
www.dell.com/
53