WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1
Remove the
base
cover.
2
Remove the
battery (half-length)
3
Remove the
display
assembly.
Procedure
1
Disconnect the power-adapter port cable from the system board.
2
Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
3
Lift the power-adapter port along with its cable, off the palm-rest assembly.
Figure 32. Removing the power-adapter port
1
screw
70
Removing the power-adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
or the
battery
(full-length).
www.dell.com/
2
power-adapter port
39
After working inside