WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Procedure
•
Post-requisites
Procedure
1
Align the screw holes on the antenna module with the screw holes on the display assembly.
2
Replace the four screws (M2x4) that secure the antenna module to the display assembly.
3
Adhere the tape that secures the antenna cable.
Post-requisites
1
Replace the
antenna
cover.
2
Replace the
display
assembly.
3
Replace the
wireless
card.
4
Replace the
battery (half-length)
5
Replace the
base
cover.
78
Replacing the antenna module
Replacing the antenna module
computer. After working inside your computer, follow the instructions in
or the
battery
(full-length).
44
After working inside
www.dell.com/