Cisco SF 300-08 Administration Manual page 314

Console Menu Interface
Console Interface Main Menu
Cisco Small Business 300 Series Managed Switch Administration Guide
Use Serial Port Configuration to view or change the baud rate of the configuration
port. If you are using a Windows HyperTerminal application and you change the
baud rate parameter value, you must logoff the application and reset the session
to match the values.
Telnet Configuration
Path: Switch Main Menu > System Configuration Menu > Management Settings
Telnet Configuration displays the Telnet connection timeout value and the status
of the Telnet service. You can enable or disable the Telnet service and set the
timeout value in minutes. If you do not want the Telnet session to timeout, enter a
value of 0 minutes.
SSH Configuration
Path: Switch Main Menu > System Configuration Menu > Management Settings
Use the SSH Configuration menu to view or configure the following options:
• SSH Server Configuration
• SSH Server Status
• SSH Crypto Key Generation
• SSH Keys Fingerprints
SSH Server Configuration
Path: Switch Main Menu > System Configuration Menu > Management Settings
> SSH Configuration
Use SSH Server Configuration to enable or disable the SSH Server. The SSH
Server Port can be modified by entering a port value.
SSH Server Status
Path: Switch Main Menu > System Configuration Menu > Management Settings
> SSH Server Status
Use SSH Server Status to view the SSH server status, the RSA and DSA key
status, and any open SSH sessions.
Select Refresh to update the screen.
20
302