Download
Share
Print this page
Cisco SG300-10P Quick Setup Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Network Router
  5. SG 300-10P
  6. Quick setup manual

Cisco SG300-10P Quick Setup Manual

For muxlab av over ip devices
Hide thumbs Also See for SG300-10P:

Advertisement

Quick Links

See also: Administration Manual
Cisco Ethernet Switch Quick Setup Guide
For MuxLab AV over IP Devices
© MuxLab Inc. 2017

Advertisement

loading

Related Manuals for Cisco SG300-10P

Summary of Contents for Cisco SG300-10P

  • Page 1 Cisco Ethernet Switch Quick Setup Guide For MuxLab AV over IP Devices © MuxLab Inc. 2017...

  • Page 2: Table Of Contents

    Cisco Ethernet Switch Quick Setup Guide Contents Introduction ....................... 3 MuxLab Ethernet Switch Setup Requirements ............3 Ethernet Switch Setup ....................4 3.1. Enabling IGMP ....................4 3.2. Enabling Jumbo Frames ................8 Preparing for System Installation ................9 © MuxLab Inc. 2017...

  • Page 3: Introduction

    Introduction This document covers the basic setup requirements for a Cisco Ethernet Switch. The setup examples and screen shots shown are for the Cisco model SG300-10P, but these instructions are similar and applicable to other Cisco Ethernet Switch models. MuxLab Ethernet Switch Setup Requirements...

  • Page 4: Ethernet Switch Setup

    Cisco Ethernet Switch Quick Setup Guide Ethernet Switch Setup 3.1. Enabling IGMP Follow the steps below to enable the IGMP feature on the Ethernet Switch. For further details on navigating through the Ethernet Switch web server menus, please refer to the Ethernet Switch manual.
  • Page 5 Cisco Ethernet Switch Quick Setup Guide Navigate to the menu: [Multicast → IGMP Snooping] (a) Enable the “IGMP Snooping Status” as shown below, and then click [Apply] © MuxLab Inc. 2017...
  • Page 6 Cisco Ethernet Switch Quick Setup Guide (b) Select the radio button as shown below, and click [Edit] © MuxLab Inc. 2017...
  • Page 7 Cisco Ethernet Switch Quick Setup Guide (c) Set the configuration as shown below, and then click [Apply] Step 3: Save the above configuration changes Navigate to the menu: [Administration → File Management → Copy/Save Configuration] Click on [Apply] as shown below...

  • Page 8: Enabling Jumbo Frames

    Cisco Ethernet Switch Quick Setup Guide 3.2. Enabling Jumbo Frames Follow the steps below to enable the Jumbo Frames feature on the Ethernet Switch. For further details on navigating through the Ethernet Switch web server menus, please refer to the Ethernet Switch manual.

  • Page 9: Preparing For System Installation

    Cisco Ethernet Switch Quick Setup Guide Preparing for System Installation The Ethernet Switch is now properly configured to support MuxLab AV over IP devices with respect to IGMP and Jumbo Frames. Note that MuxLab AV over IP Transmitters and Receivers are set by default with DHCP enabled, and the MuxLab 500811 ProDigital Network Controller has DHCP disabled by default and is set to a Static IP address of 192.168.168.50.
  • Page 10 Cisco Ethernet Switch Quick Setup Guide 8495 Dalton Road, Mount Royal, Quebec, Canada. H4T 1V5 Tel: (514) 905-0588 Fax: (514) 905-0589 Toll Free (North America): (877) 689-5228 E-mail: videoease@muxlab.com URL: www.muxlab.com © MuxLab Inc. 2017...