Chapter 8: Configuring Discovery; Configuring Bonjour Discovery; Bonjour For A System In Layer 2 Mode - Cisco SF 300-08 Administration Manual

Configuring Discovery

Configuring Bonjour Discovery

Cisco Small Business 300 Series Managed Switch Administration Guide
This chapter provides information for configuring Discovery.
It includes the following topics:
• Configuring Bonjour Discovery
• Configuring LLDP
As a Bonjour client, the switch periodically broadcasts Bonjour Discovery protocol
packets to directly-connected IP subnet(s), advertising its existence and the
services that it provides, for example, HTTP, HTTPs, and Telnet. (Use the Security
> TCP/UDP Services page to enable or disable the switch services.) The switch
can be discovered by a network management system or other third-party
applications. By default, Bonjour is enabled runs on the Management VLAN. The
Bonjour console automatically detects the device and displays it.

Bonjour for a System in Layer 2 Mode

When the switch is in Layer 2 mode Bonjour Discovery is enabled globally; it
cannot be enabled on a per-port or per-VLAN basis. The switch advertises all of
the services that have been turned on by the administrator: HTTP, HTTPS, Telnet,
and SSH.
When Bonjour Discovery and IGMP are both enabled, the IP Multicast address of
Bonjour is displayed on the IP Multicast Group Address Page.
When Bonjour Discovery is disabled, the switch stops any service type
advertisements and does not respond to any requests for service from network
management applications.
8
64