Snmp Provisioning For Remote Management; Backup & Restore; User Provisioning For Backup & Restore - Technicolor CGM4231 Operation Manual

SNMP Provisioning for Remote Management

10.3.1
Below are the MIBs used for Remote Management configuration:
tchRgDeviceRemoteWebAccessEnable
•
tchRgDeviceRemoteWebAccessPort
•
10.4 Backup & Restore
The backup feature saves the current gateway configuration to a local PC. These settings can be
restored later if a configuration needs to be restored, or to recover from changes that have had
an undesirable effect.
To backup the current configuration, click Backup and follow the prompts. To restore a previous
configuration, click Browse and use the navigation window to locate the local backup file. The
default filename is in the format MM_DD_YYYY.gwc. Note that this file is encrypted. When the
file has been located, click Restore to restore the settings. When the settings are restored, the
device will reboot to the restored settings.
User Provisioning for Backup & Restore
10.4.1
Administration Tab / Backup & Restore
Click on the Administration tab and then the Backup & Restore tab. This page displays Backup
& Restore setup information.
1/8/2018
Figure 10.3
Proprietary and Confidential - Technicolor 94