User Management; Add New User; Reset Password; Manage Users - Technicolor TD5130 Setup & User Manual

▪ Confirm Password — Re-type the password to confirm.
▪ Service — Select the DDNS service provider where your account is registered.
▪ Host — Type the host name.
Click Apply to save changes.
To use multiple hosts, click the Use multiple hosts shortcut at the bottom of the screen. Then click
Add to add host name.
7.7

User Management

The User Management page allows you to configure the users who can access the Wireless Gateway
web configuration utility.
To view the User Management page, click Toolbox > User Management.
7.7.1

Add New User

1 Click the Add new user shortcut at the bottom of the screen.
2 On Name, type desired user name. This will be the login name and the password of the new user.
3 On Administrator Privileges, select the user privilege.
4 Click Apply to save changes.
7.7.2

Reset Password

To reset a password, on the User Management screen, click on the user account that you want to reset
the password. Then click Reset Password.
Aside from resetting the password, no other setting can be modified unless by users of higher privileges.
7.7.3

Manage Users

To change the default user, click the Set the default user shortcut at the bottom of the screen.
To switch to another user, click the Switch to another user shortcut at the bottom of the screen. This
brings you back to the login page, then login with the desired user account.
Copyright © 2012 Technicolor. All rights reserved.
DMS-CTC-20120508-0000 v1.0.
SETUP & USER GUIDE
34