Snmp Provisioning For Routing - Technicolor CGM4231 Operation Manual

In order to change the configuration, the user needs to click on the parameters and change the
values appropriately and press the save button provided in the page.

SNMP Provisioning for Routing

6.4.3
Router Advance Feature can be configured with following MIB
tchCmWebAccessUserIfLevel int 100 à For Router Advance feature
MaxCPE settings (specific to CM config file)
RIPv2 would advertise Primary LAN (LAN.32) NETWORK
tchRgRipMd5KeyId: Not implemented
tchRgRipInterval: Available
tchRgRipDestIpAddressType: Available
tchRgRipDestIpAddress: Available
LAN.32 in routed mode with Public IP address /30 ranges with NAT disabled
tchRgIpMgmtLanMode: Available
tchRgIpMgmtLanNetwork: Available
tchRgIpMgmtLanSubnetMask: Available
tchRgIpMgmtLanGateway: Available
tchRgIpMgmtLanNapt: Available
Wireless Gateway obtains its WAN IP address dynamically or through dual IP
Note: Not Available Currently
In case the customer network is behind a router (Example with Customer Router), Customer
subnet needs to be advertised back to the IP backbone network (Static Configuration).
tchRgIpMgmtStaticRouteNetwork: Available
tchRgIpMgmtStaticRouteSubnetMask: Available
tchRgIpMgmtStaticRouteGateway: Available
tchRgIpMgmtStaticRouteRipAdvertise: Available
tchRgIpMgmtStaticRouteRowStatus: Available
1/8/2018 Proprietary and Confidential - Technicolor 46