Snmp Provisioning For Restarting The Device; Trouble Shooting - Technicolor CGM4231 Operation Manual

SNMP Provisioning for Restarting the Device

10.6.1
This will be controlled by
tchRgDeviceFactoryReset -This MIB is used for performing a Factory Reset on the
•
device
tchRgDeviceReset - This MIB is used to restart the device
•

10.7 Trouble Shooting

Ping and Traceroute are the trouble shooting features available in the Troubleshooting options.
This can be done for both the IPv4 and IPv6 networks.
Administration / Trouble Shooting
Click on the Administration tab then click on the Trouble Shooting tab. The page provides views
for running ping (to check the network connectivity to a particular IPv4 or IPv6 address) and
traceroot (for displaying the route/path and measuring transit delays of packets across the
network.
1/8/2018
Figure 10.6
Proprietary and Confidential - Technicolor 97