Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Technicolor CGA4234
Summary of Contents for Technicolor CGA4234
- Page 1 READY-SET-INSTALL Internet: Gateway Instruction Guide Technicolor CGA4234...
- Page 3 WELCOME! Thanks for choosing Atlantic Broadband as your new internet provider! We’re excited to deliver our high-speed internet and WiFi services directly into your business. In this box, you’ll find everything you need to start utilizing our reliably fast internet for all your business needs. Thanks again for choosing Atlantic Broadband and enjoy your new internet service!
-
Page 5: What You'll Need
FOLLOW THESE EASY INSTRUCTIONS TO SET UP YOUR NEW INTERNET SERVICE. Easy Under 20 Minutes Difficulty: Time to Complete: WHAT YOU’LL NEED: Gateway Ethernet Cord Coaxial Cable Power Cord Note: If you have ordered Atlantic Broadband phone service, you will also need a phone cord, which will be included. If you have more than one phone, or devices that use a phone line (i.e. - Page 6 HOW TO SET UP YOUR GATEWAY: Follow these steps to connect your new gateway, the all-in-one device that allows you to utilize both wired and wireless (WiFi) devices. Locate cable wall outlet Connect coaxial cable from the wall (coaxial) in a central to gateway (insert into connector location.
- Page 7 Ethernet Cord Coaxial Cable Phone Cord Power Cord...
- Page 8 STEPS TO CONNECT TO WIFI: To connect to your new WiFi network, you can keep the default WiFi network names and password OR you can rename them. To connect to the default WiFi network: Look for the label on the bottom of your gateway (example shown here).
- Page 9 Locate the unique 5G SSID on your gateway, and then select it from your available WiFi networks list. If you don’t see the 5G SSID listed, select the 2.4G SSID instead. Then input the password or “Pre-Shared Key” from your label. Your device is now connected to your WiFi network! Repeat steps 2 and 3 to connect all the wireless devices in your business to your new WiFi network.
- Page 11 We hope you enjoy your new internet service. If you have any questions, we’re here to help you answer them 24-hours a day, 7 days a week. Need additional support? Please visit atlanticbb.com/BizTechnicolorInstall to check out online resources or call 1-855-297-4098 for assistance.
- Page 12 TechCGA4234Guide0420B...
Need help?
Do you have a question about the CGA4234 and is the answer not in the manual?
Questions and answers
How do I block devices from using my modem
To block devices from using the Technicolor CGA4234 modem, you would need to access the modem’s settings. Typically, you can do this by connecting to the modem through a web browser using its IP address (often 192.168.0.1 or 192.168.1.1). After logging in with the admin credentials, you can:
1. Disable WiFi on the modem to prevent wireless connections.
2. Use MAC address filtering to block specific devices.
3. Set the modem to Bridge Mode, which disables routing functions and WiFi, making it act only as a modem.
In the provided context, it is mentioned that the Technicolor modem was set to Bridge Mode when working with Nest WiFi, which effectively prevents devices from connecting directly to it.
This answer is automatically generated