Wan; User Provisioning Of Wan - Technicolor CGM4231 Operation Manual

6.2.1.1 Procedure to set SNMP LAN Settings
The following MIBs are used to configure the LAN settings:
tchRgIpMgmtLanSubnetMask
•
tchRgIpMgmtLanGateway
•
tchRgIpMgmtLanDhcpServer
•
tchRgIpMgmtLanDhcpServerPoolStart
•
tchRgIpMgmtLanDhcpServerPoolEnd
•
tchRgIpMgmtLanDhcpServerLeaseTime
•
tchRgIpMgmtDnsServerIp
•

6.3 WAN

User Provisioning of WAN

6.3.1
Connection Tab / WAN
Click on the Connection tab then click on the WAN tab. The page displays WAN configuration
information. The page also allows the setting of WAN configuration - Working Mode (Router
Mode, Bridged Mode), Connection Mode (DHCP, Static IP), Host Name and Domain Name.
When the Gateway WAN provisioning is enabled with DHCP, IPv4 and IPv6 DHCP client on the
gateway will initiate DHCP request to get the eRouter / WAN IP for the gateway. In case of
DHCP v6, the eRouter IP is obtained from the MSO network through IP Prefix delegation.
6.3.1.1 Working Mode
The Gateway can be configured to operate in Bridge or Router mode using this drop-down tab,
which allows specific configuration of the device to Router or Bridge Mode for access and
security.
1/8/2018
Figure 6.3
Proprietary and Confidential - Technicolor 39