5.6 DOCSIS Signal
Status Tab / DOCSIS Signal
Click on the Status tab then click on DOCSIS Signal. The DOCSIS Signal page displays the
plant information on which the modem is connected.
Upstream Bonding:
This section displays information about RF upstream Bonding, including upstream channel ID,
Upstream Lock Status, Channel Type, Centre Freq., Band Width, Modulation, and Power Level
(Tx Power level at gateway for the particular channel).
Upstream Bonding - Number of channels locked to upstream which can be used for
•
upstream data transfer
Upstream channel ID - The CMTS identification of the upstream channel
•
Upstream Lock Status - Displays Locked if QAM and FEC are locked (indicates that the
•
channel is usable)
Upstream Channel Type - Displays if it is a SC-QAM channel (Phy type 3) or a OFDMA
•
channel (Phy type 5)
Upstream Centre Frequency - The center of the frequency band associated with this
•
upstream interface. Displays 0 if the frequency is undefined or unknown.
Upstream Band Width
•
CMTS (Generally 1.6MHz, 3.2Mhz or 6.4MHz)
1/8/2018
Figure 5.9
-The bandwidth of this upstream interface as configured on the
Proprietary and Confidential - Technicolor
30