On-Board Tool Cleaning; Edge Cleaning Feature; Automatic Self-Adjusting Nozzle - Carpet Pro CPU-1QD Owner's Manual

Model: CPU-1T & CPU-2T
This model is equipped with on-board cleaning tools
including a wand, stretch hose, dusting brush and a
crevice tool.
1. Remove the stretch hose from the nozzle of the
vacuum (Fig. 1).
2. Attach any of the on-board tools to the end of the hose
if you do not need the wand (Fig. 2).
3. Or attach the wand to the end of the hose and add any
of the on-board tools to the end of the wand (Fig. 3).
Model: CPU-1QD
This model is equipped with on-board cleaning tools
including an in-line metal telescopic wand, stretch hose,
dusting brush and a crevice tool.
1. To use the cleaning tools, lift the hose handle straight
up from the vacuum (Fig. 4).
2. Extend the wand by pulling the button back and
pushing the end of the wand forward (Fig. 5).
3. Attach any of the on-board tools to the end of the
wand or if you do not need the wand, remove the wand
and any tool can be connected directly onto the hose
handle.
The edge cleaning feature provides improved cleaning of carpets near walls and stationary furniture. For maximum
edge cleaning, position the right side of the vacuum (from the user's perspective) near walls or stationary furniture.
Your Carpet Pro vacuum cleaner is designed with an automatic self-adjusting nozzle. No manual adjustments
are required. The height of the nozzle is instantly and automatically adjusted to carpet pile height. This self-
adjusting feature allows the nozzle to float evenly over all carpet pile surfaces.

On-Board Tool Cleaning

Edge Cleaning Feature

Automatic Self-Adjusting Nozzle

Fig. 2
Fig. 4
8
Fig. 1
Fig. 3
Fig. 5