Info Button; Alarm Button With Alarm Led - Siemens DESIGO PX User Manual

Alarm LED
response
Note
Siemens Building Technologies
Siemens Building Automation
2.2.3

Info button

Figure 2-4 Info button
You can use the Info button to display a pop-up window
containing all the available information about the selected
line. You can close the pop-up window by pressing the Info
button (or Esc button) again.
2.2.4

Alarm button with alarm LED

Figure 2-5 Alarm button with alarm LED
The alarm LED lights up or flashes when an alarm or event is
tripped in the system. The alarm button takes you straight to
the alarm list.
Alarm Sym-
LED bols
Flashing
Steady
light
Off
Alarms are operated by use of the push-dial (see Section 5).
PXM10 operator unit
Event
Pending alarm, unacknowledged
(pop-up window and alarm list)
Incoming event (pop-up window only)
Pending alarm, acknowledged, and
extended alarm, acknowledged but
not reset (alarm list)
No active alarms
9/34
CM110397en
31.08.2004