Nexcom NISE 3640M2 User Manual page 79

Chapter 4: BIOS Setup
ACPI Sleep State
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced Chipset PCIPnP
ACPI Settings
Enable Hibernation [Enabled]
ACPI Sleep State [S3 only(Suspend to...]
ACPI Sleep State
Suspend Disabled
S1 only (CPU Stop Clock)
S3 only (Suspend to RAM)
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled, S1 (CPU Stop Clock)
and S3 (Suspend to RAM).
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
Security Exit
Select the ACPI sleep state the
system will enter when the SUS-
PEND button is pressed.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Wake System with Fixed Time
This section is used to configure the wake up function.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main
Advanced Chipset
Wake system with Fixed Time
Wake system with Fixed Time
Disabled
Enabled
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enables or disables the system's wake on alarm event. When enabled, the
system will wake up on the specified time.
62
Exit
PCIPnP Security
[Disabled]
Enable or disable System
wake on alarm event. When
enabled, System will wake on the
hr::min::sec specified
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
NISE 3640M Series User Manual