Contrast Select - Omega HHP360 Series User Manual

Contrast Select

The Contrast Select register allows the user to adjust the character
contrast of the LCD display to provide the best visibility for the
ambient light conditions.
To adjust the contrast, follow these steps:
Keystroke
1. From the Measure
Mode press the PRGM
key.
2. Press the  arrow key
three times.
3. Press the PRGM key.
4. Press the  or  arrow
keys to increase or
decrease the contrast
value. A low number
gives maximum contrast
and a high number gives
minimum contrast.
5. Press the PRGM key.
6. Press the  arrow key.
If an error is made during the contrast adjustment, pressing the 
key returns the display to the previous contrast setting.
24 of 36
Display
Top line reads "PROGRAM
MODE" and bottom line reads
"UNITS SELECT".
Bottom line reads
"CONTRAST SELECT".
Top line reads "CONTRAST
SELECT" and bottom line
shows a numerical value.
LCD lightens or darkens
depending on the value set.
Top line reads "PROGRAM
MODE" and bottom line reads
"UNITS SELECT".
Returns to Measure Mode.