Header Name
Follow the steps below to edit the Header Name.
Keystroke
1. From the Measure Mode
press the PRGM key.
2. Press the arrow key
twice.
3. Press the PRGM key.
4. Press the arrow key
five times.
5. If header is correct press
backspace key. If editing
is desired proceed to step
7.
6. Press the arrow key.
7. Press the or arrow
keys to set the correct
alpha-numeric value.
8. Press the arrow key to
accept entry.
9. Repeat steps 8 and 9 until
the desired Header is
shown.
10. If an error is made press
the back arrow key until
the cursor is over the
incorrect value. Follow
step 8 to correct. Press the
arrow key to advance
the cursor without
changing values.
11. When the Header is
complete press the PRGM
key until header accepted.
12. Press the arrow key.
23 of 36
Display
Top line reads "PROGRAM
MODE" and bottom line
reads "UNITS SELECT".
Bottom line changes to
"USER INFO SELECT".
Bottom line shows serial
number.
Top line reads "HEADER
NAME" and bottom line
reads "text". The cursor
flashes at bottom left.
Top line reads "PROGRAM
MODE" and bottom line
reads "USER INFO
SELECT".
Returns to Measure Mode.
Displays a number between 0
and 9, a letter from A to Z, /
or a blank space.
Cursor advances one space to
right.
Top line reads "PROGRAM
MODE" and bottom line
reads "UNITS SELECT".
Returns to Measure Mode.