Service manual
Save error and event logs to a USB flash drive
This feature is available in software versions 1.71.03 and later.
You can save a copy of the error and event logs to a USB flash drive.
Note
1. Connect a flash drive to the USB port.
2. Go to the Service screens as described in "Access the Service screens."
3. Touch the Logs tab.
4. Touch Save to USB.
A confirmation dialog appears.
5. Touch OK.
Copies of both log files are saved to the drive.
Device tab
View device and module information
1. Go to the Service screens as described in "Access the Service screens."
2. Touch the Device tab.
Device and module information appears for you to view.
Licensing tab
View device licenses
Note
1. Go to the Service screens as described in "Access the Service screens."
2. Touch the Licensing tab.
A list of available licenses appears. Checks indicate installed licenses.
Not all flash drives are supported.
After activating a new license, make sure to restart the device to complete
the activation process.
Service menu 27