Maintenance - Mallinckrodt INOblender 10026 Operation And Maintenance Manual

Inoblender series
Table of Contents

Advertisement

Maintenance

Cautions:
• When cleaning, do not submerge in liquid.
• Do not autoclave.
Note: The INOblender does not contain any user repairable parts.
Cleaning Procedure
Caution
:
• Apply cleaning agent to a cloth before application; do not spray cleaning agent directly on the device.
It is important to prevent pooling and direct contact with open connections which can cause damage
over time.
- Clean the outer surface of the INOblender with a soft cloth dampened in a mild soap and water solution
(Example: Palmolive Ultra antibacterial, 4 drops per 50 mL of warm water), isopropyl alcohol (70%), or
with one of the following cleaning agents while following the manufacturer's recommendations.
Cleaning Agent
Precise Hospital Foam Cleaner
Disinfectant by Caltech Industries
Pure Green 24 by Pure Green, LLC
PDI Super Sani Cloth by PDI
Sani Cloth HB by PDI
Asepti-HB by Ecolab Inc.
Cavicide and CaviWipes by Metrex
Bioquell Hydrogen Peroxide Sterilant
Bioquell Hydrogen Peroxide Sterilant and hydrogen peroxide vapor generators are regulated by the US
Environmental Protection Agency (EPA) as pesticide chemicals in accordance with Federal Insecticide,
Fungicide, and Rodenticide Act (FIFRA). Use of these products in cleaning/disinfection processes have not
been validated with the INOblender. Do not use these products to decontaminate the INOblender or any
ancillary products used with the INOblender.
Active Ingredients
o-Phenylphenol < 0.37%
Other ingredients 99.63%
SDC – silver ions 0.003%
Citric acid 4.84%
Other ingredients 95.157%
n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides 0.25%
n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium
chlorides 0.25%
Isopropyl alcohol 55%
Inert ingredients 44.50%
n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium
chlorides 0.07%
n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides 0.07%
Inert ingredients 99.86%
n-Alkyl (60% C14, 30% C16, 5% C12, 5% C18) dimethyl benzyl ammonium
chlorides 0.07%
n-Alkyl (68% C12, 32% C14) dimethyl ethylbenzyl ammonium chlorides 0.07%
Inert ingredients 99.86%
Diisobutylphenooxyethoxyethyl dimethyl benzyl ammonium chloride 0.28%
Isopropyl alcohol 17.2%
Inert ingredients 82.52%
15
Part No. 20732 Rev-02
2014-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inoblender 10021Inoblender 10004Inoblender 10070

Table of Contents