Mallinckrodt INOblender 10026 Operation And Maintenance Manual page 2

Inoblender series
Table of Contents

Advertisement

User Responsibility
This Product will perform in conformity with the
description contained in this operating manual
and accompanying labels and/or inserts, when
assembled, operated, maintained and repaired
in accordance with the instructions provided. This
Product must be checked prior to use following the
Pre-Use Checkout procedure described in section
3. A defective Product should not be used. Parts
that are broken, missing, visibly worn, distorted or
contaminated should be replaced immediately.
Should such repair or replacement become
necessary, the manufacturer recommends that a
telephone request for service advice be made to
the local distributor. This Product or any of its parts
should not be repaired other than in accordance with
written instructions provided by the manufacturer or
local distributor. The Product must not be altered.
The user of this Product shall have the sole
responsibility for any malfunction which results
BL 20051234
10026
10004
10021
10070
Mallinckrodt, the "M" brand mark and the Mallinckrodt Pharmaceuticals logo are trademark of a Mallinckrodt company. Other brands are trademarks
of a Mallinckrodt company or their respective owner. ©2016 Mallinckrodt
Part No. 20732 Rev-02
2014-02
from improper use, faulty maintenance, improper
repair, damage, or alteration by anyone other than
Mallinckrodt Representatives.
Outside the U.S.A. and Canada, check local
laws for any restrictions that may apply.
Caution: U.S. Federal and Canadian law restrict
this device to sale by or on the order of a licensed
medical practitioner.
Inhaled Nitric Oxide mixtures must be handled
and stored in compliance with federal, state and
local regulations.
These products have unit serial numbers with coded
logic which indicate the year of manufacture and a
sequential unit number for identification.
The first two digits indicate the product, the next four numeric digits
indicate the year of manufacture, and the next four digits are the
sequential unit number produced that year.
INOblender (DISS, 800 ppm, English)
INOblender (DISS, 800 ppm, English)
INOblender (NIST, 400 ppm, English)
INOblender (NIST, 800 ppm, English)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inoblender 10021Inoblender 10004Inoblender 10070

Table of Contents