Table 7: Nellcor Oximax Sensor Models And Patient Sizes - Nellcor OxiMax N-595 Operator's Manual

N-595
Caution: The O M
XI
associated alarm indicate that the O
disconnected or the wiring is faulty. The user should check the
O M sensor connection and, if necessary, replace the O
XI AX
sensor, pulse oximetry cable, or both.
Note: Physiological conditions, medical procedures, or external
agents that may interfere with the pulse oximeter's ability to
detect and display measurements include dysfunctional
hemoglobin, arterial dyes, low perfusion, dark pigment, and
externally applied coloring agents such as nail polish, dye, or
pigmented cream.
For a complete and up-to-date listing of all O
to the N-595, refer to the Sensor Accuracy Grid posted on the Internet
at:
http://www.mallinckrodt.com/respiratory/resp/Serv_Supp/ProductManuals.html
When selecting an O
activity level, the adequacy of perfusion, and the available O
sensor sites, the need for sterility, and the anticipated duration of
monitoring. For more information refer to Table 7 on page 101 or
contact your local Nellcor representative. Refer to OXIMAX Sensor
Performance Considerations on page 113, for more information on
O M sensor performance.
XI AX
Table 7: Nellcor O
XI
O M
Sensor
XI AX
-
O M MAX FAST adhesive
XI AX
reflectance oxygen sensor
OXIMAX Sensors and Accessories
sensor disconnect error message and
AX
M
XI AX
M sensor, consider the patient's weight and
XI AX
M Sensor Models and Patient Sizes
AX
Model
MAX
sensor is either
M
XI AX
M sensors applicable
XI AX
M
XI AX
Patient
Size
- >10 kg
FAST
101