Max Sensor Event Record Not Available - Nellcor OxiMax N-595 Operator's Manual

OXIMAX Sensor Event Record
O M Sensor Event Record Not Available
XI AX
70
If data is still being read from the O
the DATA IN SENSOR message is replaced with a READING
TRENDS message with an ABORT option.
Selecting the ABORT softkey stops the recording of additional data
in the O M sensor and accessing or viewing the data that is in the
XI AX
O M sensor.
XI AX
Sensor event record can be viewed by accessing the TREND/
SENSOR menu.
The SENSOR EVENT RECORD LED comes on steady when
O M sensor memory is full and stays on until the O
XI AX
disconnected.
If the user selects the TREND/SENSOR option when a connected
O M sensor (single-patient-use O
XI AX
contain data, because no events were recorded to the O
memory chip in the prior monitoring situation, a "NO DATA"
message is displayed on the default trend or event graph.
M sensor, after 4 to 6 seconds,
XI AX
M
XI
M sensors only) does not
XI AX
M
XI
sensor is
AX
sensor
AX