Powering Up the Base
WARNING
Terminal and Base
Docking the Terminal
on the Base
To power up the base:
1
Insert the micro-USB plug into the micro-USB port on the base.
2
Plug the AC power cord into a wall outlet or a power surge protector.
Figure 14
Connecting Base to Power Source
Using an incorrectly rated power supply can damage the unit or cause it not to
work properly. Use only a power pack with P/N PWR260-001-XX-A. See
Specifications
for detailed power supply specifications.
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors. Disconnecting power during a transaction can also cause unstored
transaction data files to be lost.
The terminal can be placed on the base when not in use. This ensures continuous
charging of the battery.
To dock the terminal on the base:
1
Place the top portion of the terminal on the base. Ensure that the recess on
the bottom of the terminal sits on top of the docking connector.
Figure 15
Docking the Terminal on the Base
VX 685/VX 690 I
NSTALLATION
S
ETUP
Base Stations
25
G
UIDE