Connection Port; Paper Roll - VeriFone VX 685 GPRS Installation Manual

S
ETUP

Connection Port

Connection Port

Paper Roll

CAUTION
Installing or
Replacing a Paper
16
VX 685/VX 690 I
NSTALLATION
The terminal has one primary micro-USB port used for power and download.
Figure 3 Micro-USB Port on the Terminal
A fast and quiet thermal printer is built into the terminal. You must install a roll of
thermal-sensitive paper in the printer before you can process transactions that
require a receipt or record.
The ITP uses a roll of single-ply and thermal-sensitive paper 40 mm in diameter. A
pink out-of-paper indicator line appears on the edge of the paper approximately
18 inches before the end of the roll. After this line appears, there is enough paper
remaining on the roll to conclude at least one transaction.
Poor-quality paper can jam the printer and create excessive paper dust. Refer to
Accessories and Documentation to order high-quality Verifone paper. Store
thermal paper in a dry and dark area. Handle thermal paper carefully. Impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper. Never load a roll of paper with folds, wrinkles, tears,
or holes at the edges in the print area.
To install or replace a paper roll:
1
Gently pull the latch on top of the terminal to unlock the compartment.
Roll
2
Lift the printer cover up and back.
3
Remove any partial roll of paper in the printer tray.
4
Loosen the glued leading edge of the new roll of paper or remove the
protective strip, if applicable. Unwind the paper roll past any glue residue.
5
Hold the roll so the paper feeds from the bottom of the roll when the terminal is
inverted.
G
UIDE