Omni 3600 Terminal and Omni 3600 Base Installation
NOTE
Select a
Location
Omni 3600
Terminal
Omni 3600 Base
Environment
WARNING
This chapter describes how to set up and install the Omni 3600 terminal and
Omni 3600 base, including how to:
•
protect the terminal from adverse Environmental conditions,
•
install and maintain the
•
establish communications connections through the
Communications
Ports, and
•
connect optional peripheral devices through the Omni 3600 base (see
Peripheral
Devices).
This installation procedure is also available for end users in the Omni 3600
Installation Guide (VeriFone part number 22060), which can be downloaded at:
http://www.verifone.com/support/index.html
This section provides tips on using and protecting your Omni 3600 terminal, and
location recommendations for the Omni 3600 base.
The Omni 3600 is a portable terminal for performing transactions remotely. Since
it is a portable unit, location is not a factor however, follow the rules established in
the
Environment
and
Convenience
A prime location for the Omni 3600 base is a counter or other flat surface that
provides easy access to a power outlet and phone jack. Also, follow the rules
established in the
Environment
Do not leave this terminal in a non-climate-controlled
vehicle. The Omni 3600 terminal is highly sensitive to
temperature extremes. Subjecting the terminal to temperatures
outside the stated
operating range
•
Do not use the Omni 3600 terminal or Omni 3600 base where there is
moisture or high humidity, chemicals or oils, or excessive heat or dust.
•
Avoid locations near electrical appliances or other devices that emit excessive
voltage fluctuations or electrical noise (for example, air conditioners, electric
motors, neon signs, high-frequency or magnetic security devices, or computer
equipment).
Smart
Battery,
sections.
and
Convenience
sections.
can void your warranty.
C
HAPTER
Omni 3600 Base
O
3600 R
M
MNI
EFERENCE
ANUAL
1
7