CAUTION
SIM Card
Installing or
Replacing a SIM Card
NOTE
6
Drop the paper roll into the printer tray.
Figure 4
Installing Paper Roll Cover
Gently press down on the paper roll cover to close it to prevent damaging the
print roller.
VX 685 has a single SIM slot that enables communication to the network provider.
VX 690 supports dual SIM. SIM slot 1 is preferred for single SIM use. When dual
SIM is employed, it is ideal to use SIM cards from two different network providers.
This allows the terminal to switch SIMs when it detects poor signal or no network.
To install or replace a SIM card:
1
Turn off the terminal.
2
Place the terminal face down on a soft and clean surface to protect the lens
from scratches.
3
Lift the battery pack to expose the SIM slots.
Position the card's gold contacts facing away from you, toward the unit. The card
slot in the terminal has a set of contacts. The SIM card has a notch on one corner
to ensure that it fits into the connector base in only one way.
VX 685/VX 690 I
NSTALLATION
S
ETUP
SIM Card
17
G
UIDE