Step 3: Check Your Connection - VeriFone e285 Quick Start Manual

STEP 3: CHECK YOUR CONNECTION

Wi-Fi
1. Use the keypad to press 1, 5, and 9 at the same time.
2. Tap Com Control.
3. Tap WiFi.
4. Tap Status.
5. Confirm that the Status field shows "Up."
– If the Status field shows "Down," contact our Support Team. For more information about
how to contact our Support Team, go to the FAQs section.
Bluetooth
1. Use the keypad to press 1, 5, and 9 at the same time.
2. Tap Com Control.
3. Tap More.
4. Tap Status.
5. Tap IP Addresses.
6. Tap BT LAN.
7. Confirm that the Status field shows "Up."
– If the Status field shows "Down," contact our Support Team. For more information about
how to contact our Support Team, go to the FAQs section.
STEP 4: CHECK THAT YOUR DEVICE IS READY TO USE
Check that your device connects to the internet
1. From the home screen, use the keypad to press 000.
2. Use the keypad to enter the passcode, and then tap OK.
The default passcode is 9416557.
3. Check that there is an IP address next to the
IP address field.
6 | Wireless e285 Quick Start Guide