Adjusting Display Panel Brightness; Locking The Display Panel - Fujitsu LifeBook T3010 Manual

Figure 2-14. Display rotated completely
Figure 2-15. System in tablet configuration

Adjusting Display Panel Brightness

Once you have turned on your Tablet PC, you
may want to adjust the brightness level of the
screen to a more comfortable viewing level. There
are two ways to adjust the brightness, keyboard
and power management utility.
Using Keyboard to Adjust Brightness
Adjusting the brightness using the keyboard
changes the system setting (i.e., the settings you
make via the function keys automatically changes
the brightness settings in the system's Pen and
Tablet Settings).
• [Fn+F6]: Pressing repeatedly will lower the
brightness of your display.
• [Fn+F7]: Pressing repeatedly will increase the
brightness of the display.
16
Using Power Management to Adjust
Brightness
To adjust brightness with the power management
utility, click Start → Control Panel → Tablet and
Pen Settings.
Select the Display tab and set the screen
brightness slider for battery and AC power
scenarios.
If using AC power your brightness setting
is set to its highest level by default. If using
battery power your brightness settings is
set to approximately mid-level by default.
The higher the brightness level, the more
power the LifeBook T Series Tablet PC
will consume and the faster your batteries
will discharge. For maximum battery life,
make sure that the brightness is set as
low as possible.

Locking the Display Panel

1. Holding the top edge of your display panel,
pull it forward until it is flush with the body of
your Tablet PC.
2. Push the panel down until you hear a click.
This will engage the locking mechanism and
prevent your display panel from opening
unexpectedly.