Fujitsu LifeBook T3010 Manual page 72

Problem
Video Problems
A foreign object, such as a
The display does
paper clip, is stuck
not close.
between the display and
the keyboard.
If the spots are very tiny
The display has
and few in number, this is
bright or dark
normal for a large LCD
spots.
display.
If the spots are numerous
or large enough to
interfere with your
operation needs.
You are running an
The application
application that does not
display uses only a
support 800 x 600/1024 x
portion of your
768 pixel resolution
screen and is
display and display
surrounded by a
compression is enabled.
dark frame.
Your BIOS setup is not set
You have
to enable your external
connected an
monitor.
external monitor
and it does not
display any
information.
Your external monitor is
not properly installed.
Your operating system
software is not set up with
the correct software driver
for that device.
You have connected Your external monitor is
an external monitor not compatible with your
and it does not Tablet PC.
come on.
Miscellaneous Problems
An error message Application software often
is displayed on the has its own set of error
screen during the message displays.
operation of an
application.
60
Possible Cause Possible Solution
Remove all foreign objects from the keyboard.
This is normal; do nothing.
Display is faulty; contact your support
representative.
Display compression gives a clearer but
smaller display for applications that do not
support 800 x 600/1024 x 768 pixel resolution.
You can fill the screen but have less resolution
by changing your display compression setting.
See the Video Features submenu, located
within the Advanced menu of the BIOS.
Try toggling the video destination by pressing
[Fn] and [F10] together, or check your BIOS
setup and enable your external monitor. (See
the Video Features submenu, located within
the Advanced Menu of the BIOS.
Reinstall your device.
Check your device and operating system
documentation and activate the proper driver.
See your monitor documentation and the
External Monitor Support portions of the
Specifications section.
See your application manual and help displays
screens for more information. Not all
messages are errors some may simply be
status.