Calibrating The Pen; Replacing The Pen Tip; Using The Touch Screen - Fujitsu LifeBook T3010 Manual

Lifebook t series tablet pc
Hide thumbs Also See for LifeBook T3010:
Table of Contents

Advertisement

Calibrating the Pen

In order to ensure accurate tracking between the
pen and cursor, you must run the Touch Screen
Calibration Utility before you use the Touch
Screen for the first time, or after you change the
display resolution.
To run the calibration utility:
1. Go to Start → Control Panel and double-click
on the Tablet and Pen Settings icon.
2. Click Calibrate.
3. Adjust the display of your Tablet PC to a
comfortable angle.
4. Using the pen, firmly touch the screen directly
on the (+) symbol; the pen tip, the (+) symbol
will move to the next location.
5. Repeat step 4 in the four corners of the screen,
then click OK.

Replacing the Pen Tip

With use, the pen tip may become worn or may
pick up foreign particles that can scratch the
screen. A damaged or worn tip may not move
freely, causing unpredictable results when using
the pen. If your pen exhibits these problems, you
should replace the pen tip. To do so, use the pen
tip removal tool included with your pen.
Figure 2-24. Tip Removal Tool
To remove the tip, position the tip in the gap
between the two ends of the tool. Pinch the tool
together so the tip is firmly clasped, then pull it
from the barrel. If the tip is worn or damaged,
discard it.
To replace the tip, retrieve one of the new tips
that accompanied your pen. Insert the flat end of
the tip into the barrel and push it in firmly until it
is seated.
G e t t i n g t o K n o w Yo u r Ta b l e t P C

Using the Touch Screen

The integrated Touch Screen allows you to use
the included pen as a pointing device. You can
use the pen to click, double-click, drag items and
icons, or to draw like a pen or pencil in
applications that support this behavior, such as
drawing or painting programs. See the
documentation that came with your application
for details. (Figure 2-25)
Figure 2-25. Using the pen with the Screen
To avoid potential scratching and damage,
never use anything but the included pen with
the display.
Gap
27

Advertisement

Table of Contents
loading

Table of Contents