Fujitsu LifeBook T3010 Manual page 90

Confirming the computer and work group
names
To modify the computer name and/or the
work group name, you need to be logged in
from Windows as an administrator.
1. Click the [Start] button, then [Control Panel].
2. If the Control Panel is in Category view, switch
to Classic view by clicking "Switch to Classic
View" under Control Panel the left frame. (If
you are already in Classic view, "Switch to
Category View" will be displayed.)
3. Double-click the [System] icon. The [System
Properties] window will be displayed.
4. Click the [Computer Name] tab.
5. Confirm the settings of [Full computer name:]
and [Workgroup:].
a.The setting of [Full computer name:]
denotes the name for identifying the
computer. Any name can be assigned for
each personal computer.
To change the name, click [Change] and then
proceed in accordance with the instruction
messages displayed on the screen.
Enter the desired name in less than 15
ASCII character code format. Identifiability
can be enhanced by entering the model
number, the user name, and other factors.
b.[Workgroup name] is the group name of the
network. Enter the desired name in less
than 15 ASCII character code format.
For ad hoc connection: Assign the same
network name to all personal computers
existing on the network.
For infrastructure connection: Assign the
name of the work group to be accessed.
6. Click the [OK] button. If a message is
displayed that requests you to restart the
personal computer, click [Yes] to restart the
computer.
78
Setting the sharing function
Set the sharing function to make file and/or printer
sharing with other network-connected personal
computers valid.
This operation is not required unless the sharing
function is to be used.
The folder and printer for which the sharing
function has been set will be usable from any
personal computer present on the network.
To share a file and/or the connected printer,
you need to be logged in as an administrator.
Setting the Microsoft network-sharing service
1. Click the [Start] button first and then [Control
Panel].
2. If the Control Panel is in Category view, switch
to Classic view by clicking "Switch to Classic
View" under Control Panel the left frame. (If
you are already in Classic view, "Switch to
Category View" will be displayed.)
3. Double-click [Network Connections]. A list of
currently installed networks will be displayed.
4. Right-click [Wireless Network Connection] in
the list, and then click [Properties] in the menu
displayed. The [Wireless Network Connection
Properties] window will be displayed.
5. If [File and Printer Sharing for Microsoft
Networks] is displayed, proceed to step
6. If [File and Printer Sharing for Microsoft
Networks] is not displayed, skip to step 7.
6. Make sure that the [File and Printer Sharing
for Microsoft Networks] check box is checked,
and then click the [OK] button. Skip to "Setting
filesharing function".
7. Click [Install]. The [Select Network
Component Type] window will be displayed.
8. Click [Service], then click the [Add] button.
The [Select Network Service] window will be
displayed.
9. Click [File and Printer Sharing for Microsoft
Networks] and then click the [OK] button.
Processing will return to the [Wireless
Network Connection Properties] window, and
[File and Printer Sharing for Microsoft
Networks] will be added to the list.
10. Click the [Close] button.