Figure 2-10 Battery Level Indicator
A shorted battery is damaged and must be
replaced. (Figure 2-10)
If there is no battery activity and the power
adapters are not connected, the Battery
Level indicators will also be off.
Battery Level Indicators
The Battery Level indicators state whether or not
the Lithium ion battery is installed and how much
charge is available within the battery.
(Figure 2-10)
Additionally, this indicator displays when an
overcurrent is detected. If an overcurrent is
detected, the battery stops charging and the
Battery Level indicator blinks at the rate of once
per second. To stop the indicator from blinking,
you must disconnect the power adapter.
Hard Drive Access Indicator
The Hard Drive Access indicator states whether
your internal hard drive is being accessed.
14
76%–100% Charging
76%–100%
51%–75%
26%–50%
11%–25%
Low Warning <11%
Critical Low or Dead
Battery
Shorted Battery
NumLk Indicator
1
The NumLk indicator states that the integral
keyboard is set in ten-key numeric keypad mode.
If there is no battery activity and the power
adapters are not connected, the Battery Level
indicators will also be off.
If you are using the optional external
numerical keypad, pressing the [NumLk] key
will activate the external keypad. The
indicator will come on, however it will not
change any of the functionality of your
keyboard keys.
CapsLock Indicator
The CapsLock indicator states that your
keyboard is set to type in all capital letters.
ScrLk Indicator
The ScrLk indicator states that your scroll lock
is active.
Security Indicator
The Security Indicator flashes (if a password was
set) when the system resumes from Off or
Standby modes. You must enter the password
that was set in the Security Panel before your
system will resume operation.