Status Indicator Panel; Battery Charging Indicators; Battery Level Indicators; Hard Disk/Cd Access Indicator - Fujitsu LifeBook P7000 User Manual

Fujitsu lifebook p7000 notebook
Hide thumbs Also See for LifeBook P7000:
Table of Contents

Advertisement

L i f e B o o k P 7 0 0 0 N o t e b o o k – S e c t i o n T w o

Status Indicator Panel

The Status Indicator displays symbols that correspond
with a specific component of your LifeBook notebook.
These symbols (when visible) tell you how each of those
components is operating. (Figure 2-8). When you turn
off the system, all indicators will go off, except when the
battery is being charged.

BATTERY CHARGING INDICATORS

When the AC adapter is connected to your system, these
indicators show the status of the specified battery
charging (either the primary battery 1 or modular
battery 2), as follows:
Green, solid: The battery is either fully charged or the
AC adapter is connected and there is no battery pack
installed.
Orange, solid: The battery pack is charging.
Orange, blinking: Charging is suspended due to exces-
sively high or low battery temperature.
Off: No AC adapter is connected.

BATTERY LEVEL INDICATORS

The Battery Level indicators display the charge level of
the indicated battery pack, as follows:
Green, solid: Battery is between 51% and 100%
charged.
Orange, solid: Battery is between 13% and 50%
charged.
Red, solid: Battery is between 0% and 12% charged.
Orange, blinking: Blinks during battery status
measurement (Four seconds after the battery is
installed).
Red, blinking: There is a problem with the battery.
Off: There is no battery installed.
12
Battery 1
Charging
Indicator
Battery 1 Level Indicator
Figure 2-8 Status Indicator Panel
Battery 2
Charging
Indicator
Battery 2 Level Indicator
If the battery pack is installed while the
power is turned off, the battery level
indicator will display the charge level for
five seconds after it blinks orange.
If the AC adapter is not connected or the
battery pack is not fully charged when
the computer is switched to standby
mode, the indicator will blink. The LED
blinks at the rate of one second on/five
seconds off.
Batteries subjected to shocks, vibration
or extreme temperatures can be perma-
nently damaged.
A shorted battery is damaged and must
be replaced.

HARD DISK/CD ACCESS INDICATOR

The Hard Disk/CD access indicator lights when the hard
disk or optical drive is being accessed. To prevent
corruption of data, do not press the power button when
the hard disk/CD access indicator is lit.
Hard Drive/
Optical Drive
Access

Advertisement

Table of Contents
loading

Table of Contents