Advertisement
Available languages
Available languages
Thermometer:
Press „▼ C/F" button (B) to select thermometer in Celsius/Fahrenheit mode
Outdoor Thermo Sensor Unit Registration Procedure:
The main unit automatically starts receiving transmission from Outdoor Thermo Sensor for outdo
or temperature after new batteries are inserted.
The thermo sensor will automatically transmit temperature to the main unit after batteries inserted.
Batteries compartment of thermo sensor is locating behind the back cover, unscrews to
open.
Press " TX " button on the thermo sensor unit to transmit temperature to the main unit manually.
The main unit gives a "beep" sound if it received the temperature.
If the main unit cannot receive the temperature transmitted from the thermo sensor, hold "SEARCH
" button (D) for 3 seconds to cancel the channel manually. It will automatically register the thermo
sensor again if a temperature signal is received.
If there is no temperature displayed in existing channel ( " - - . –" is displayed on the LCD ), hold
"SEARCH" button (D) for 3 seconds to cancel that channel and receive the channel again, a
"Beep" sound can be heard.
The use of 1.5m cord Temperature Probe:
Insert the probe plug on the right hand side of the Thermo Sensor Unit.
Put the metal casing outside and leave the Thermo Sensor Unit in a indoor area to avoid freezing
up the battery when the outdoor temperature is below 0 °C.
Always use the temperature probe to sense the temperature when the temperature is between the
following range: -50 °C ~ 0°C and +50°C ~ + 70°C
Projection:
Slide the Projection ON/OFF Slide Switch (F) to "On" to switch on the Projector.
Press "SNOOZE/ PROJECTION/ LIGHT"(H) to project Time and Temperature (Press "SNOOZE/
PROJECTION/ LIGHT(H)" to change projection content)
Turn right or left of the "Focus" Wheel (I) to adjust appropriate focus.
Slide Project "ROTOTE" Slide Switch (G)to reverse the projection content 180°.
12/24 Hr:
Press " 12/24" button(C) to select 12 or 24 hours mode.
Back Light:
Press "SNOOZE/ PROJECTION/ LIGHT" button (H), back light states for 5 seconds
Low batteries indicator:
Low battery icon „
external transmitter is in low battery status and batteries should be replaced.
"appear at outdoor temperature row or thermo sensor unit indicates the
ENG - 22
Advertisement
