Firmware Update; How To Install The Rs-232 Interface - Datamars R-IN1300 MID User Manual

4.13 F U
IRMWARE PDATE
The GUI-version running on the browser offers the user a tool to update the software of the "R-IN
1300 Reader".
First of all select the tab named "Firmware Update" and select the file containing the new software
(delivered by Datamars SA) using the navigator and then press the "Install File"-button.
The new software is now transferred (copied) from the PC to the reader. A slider tells about the
transferring-process status.
If the transferring-process hangs or if the user notices that a wrong file has been transferred, the user
can cancel the operation and remove the transferred file clicking the "Cancel"-button.
When the whole file has been completely transferred onto the reader, the user is prompted by a pop-
up window if she/he really wants to install and activate it. The user can confirm or cancel the
operation.
If the user decides to continue and to activate the new software, she/he MUST wait until the whole
installation-process is terminated. At the end of the installation, the reader performs a reboot and the
browser connection of the user is consequently closed (the warning "Connection closed" appears on
the browser). Now the user can perform login again and verify the correct working of the new
software.
NB: The installation of the new software can require a couple of minutes: during this period it is
ABSOLUTELY FORBIDDEN to turn off the reader.
4.14 H RS-232
OW TO INSTALL THE INTERFACE
Insert the "Product CD R-IN 1300 MID" into the CD-Drive of the host-PC and double click the icon
representing the program "R-IN1300-MID_windows_3_0.exe" and follow every installation step.
Always accept the default options will install every component correctly. You can even customize
your installation specifying other options than the default ones.
R-IN1300 MID Manual – v. 1.2 – August '08 21 (29)