I-Code Isettings; Chip Read And Write Operations - Datamars R-IN1300 MID User Manual

3.3 I-C I
ODE SETTINGS
*nt[_]
3.4 C R
HIP EAD AND
General considerations for memory Read/Write:
•
keep the tags in the field
•
do not move them during the read/write operation
•
do not read/write more than ca. 10 tags at a time
Chip Read and Write
*ri[_]
R-IN1300 MID Manual – v. 1.2 – August '08
while in the antenna field.
*qm0 quiet mode off (default)
*qm1 quiet mode on
Time slots I-Code I:
*ts1 single time slot
*ts4 4 time slots
*ts8 8 time slots
*ts16 16 time slots (default)
*ts32 32 time slots
*ts64 64 time slots
*ts128 128 time slots
*ts256 256 time slots
W O
RITE PERATIONS
Explanation
Read the text contained in the memory of the specified chip:
*riUID: UID (the unique identifier of the chip) is a 16-char long
sequence.
The result of *riUID is "UID Text" (separated by a space) where
Text is the content of the memory of the specified chip.
Example:
Command:*riE004010007EFD128
Reply: E004010007EFD128 ThisIsText
The specified chip must be and remain within the magnetic
field!
9 (29)