Datamars R-IN1300 MID User Manual page 11

*wi[_][_]
*rt
*wr[_]
R-IN1300 MID Manual – v. 1.2 – August '08
Write a new text into the memory of the specified chip:
*wtUIDText: UID (the unique identifier of the chip) is a 16-char
long sequence. Text a free sequence of char (max 255 bytes).
The result of *wiUIDText is "UID status" where:
status = 'OK'
status = 'Out of memory'
status = 'Error'
status = 'Tag not in field'
Example:
Command:*wiE004010007EFD128 ThisIsMyNewText
Reply: E004010007EFD128 OK
The specified chip must be and remain within the magnetic
field!
Read the text contained in the memory of any transponder in the
magnetic field:
The result of *rt is a list of "UID Text"-couples.
The specified chip must be and remain within the magnetic
field!
Write a new text into the memory of the detected chips:
The result of *wrText is a message showing the number of tags
having been written and a list of "UID status"-couples where:
status = 'OK': success
status = 'Out of memory'
status = 'Error'
status = 'Tag not in field'
The chips must be and remain within the magnetic field!
10 (29)