Scan Cameras; Temperature Format; Power Saving Mode - Motorola MBP994CONNECT User Manual

4.6.4 Scan cameras

This function is only available when you have more than 1 Baby
Unit (Camera).
Press the M button and the menu bar will pop up.
1.
2. Press the < LEFT button or > RIGHT button until
highlighted, and the
will pop up.
3. Press the + UP button or - DOWN button to select
and press the O button to confirm.
4. The screen will then display images from different registered
cameras in a loop of Camera
approximately every 12 seconds.
TIP
Quick Method to View Cameras instead of entering into the menu
bar.
Directly press the O button repeatedly to select the available
Camera options from
4.7

Temperature format

Press the M button and the menu bar will pop up.
1.
2. Press the < LEFT button or > RIGHT button until
highlighted.
3. Press the + UP button or - DOWN button to select °C or °F.
4.8

Power Saving Mode

Press the M button and the menu bar will pop up.
1.
2. Press the < LEFT button or > RIGHT button until
highlighted.
3. Press the + UP button or - DOWN button to select auto
video off after
5 mins, 30 mins or 60 mins if operating on batteries only.
NOTE
The audio will remain and you can press any key to switch the
video back on.
24
del/ add/
+
, , , ,
view/ scan menu
, changing
.
V
Parent Unit Menu Options
is
scan,
is
is