Delete A Camera; Scan The Cameras - Motorola MBP25 User Manual

4.5.3

Delete a Camera

1. Press the button.
-
2. Press the DOWN button to select the DELETE CAMERA icon
press the button to confirm.
1 2 3 4
3. / / /
select the desired Camera unit, press the
DOWN button to select the DELETE CAM icon
4. Press the button to confirm the deletion or
NOTE
You cannot delete the Camera if it is the only Camera paired in the system.
4.5.4

Scan the Cameras

1. Press the button.
-
2. Press the DOWN button to select and choose the
selection.
3. The screen will then display images from each registered Camera in a
loop, changing once about every 10 seconds.
TIP
Quick Method to View Cameras instead of using the menu.
Directly press
NOTE
If the Parent Unit is in scan mode and one of the registered Cameras is turned
off or out of range, the scan will stop at the missing Camera (e.g. camera) and
3 ?
display the
WARNING
Check the Camera and correct the fault immediately if you are using that
Camera to monitor your baby.
If you want to continue in camera scan mode without that Camera, delete the
Camera (see 4.5.3 Delete a Camera) and start the scan again.
Parent Unit Menu Options
will pop up, press the
repeatedly to select
icon while emitting a warning beep every 8 seconds.
+ -
UP button or
button then press the
.
RETURN button to exit.
1 2 3 4
/ / / or
and
DOWN button to
-
symbol for Scan
.
17