Delete A Camera; Scan The Cameras - Motorola MBP27T User Manual

4.5.3

Delete a camera

1. Press the button.
-
2. Press the DOWN button to select the Camera setting icon
press the button to enter. Press the
CAMERA icon
1 2 3 4
3. / / /
select the desired Camera unit, press the
DOWN button to select the DELETE CAM icon
4. Press the button to confirm the deletion or
NOTE
You cannot delete the camera if it is the only camera paired in the system.
4.5.4

Scan the cameras

1. Press the button.
-
2. Press the DOWN button to select the Camera setting icon
press the button to enter. Press the
choose the
3. The screen will then display images from each registered camera in a loop,
changing about every 10 seconds.
TIP
Quick Method to View Cameras instead of using the menu.
Directly press
NOTE
If the Parent Unit is in scan mode and one of the registered cameras is turned off
or out of range, the scan will stop at the missing camera
(e.g. camera) and display the
8 seconds.
WARNING
Check the camera and correct the fault immediately if you are using that
camera to monitor your baby.
If you want to continue in camera scan mode without that camera, delete the
camera (see 4.5.3 Delete a camera) and start the scan again.
16
and press the
will pop up, press the
symbol for scan selection.
repeatedly to select
3 ?
-
DOWN button to select DELETE
button to confirm.
+
UP button or
button then press the
-
DOWN button to select and
1 2 3 4
/ / / or
icon while emitting a warning beep every
, and
-
DOWN button to
-
.
RETURN button to exit.
, and
.
Parent Unit Menu Options