4.6
Camera Control
4.6.1 Add (pair) a camera
Press the M button and the menu bar will pop up.
1.
2. Press the < LEFT button or > RIGHT button until
highlighted, and the
will pop up.
3. Press the + UP button or - DOWN button to select
and press the O button to confirm.
4. Camera
DOWN button to select the desired Camera, and press the
O button to start searching for a camera unit.
Note: If a camera is currently paired with the Parent Unit, its
camera location (with a * against it) cannot be selected for a
new registration.
5. Press and hold the PAIR button on the underside of the Baby
Unit until the Parent Unit finds the camera, beeps and PAIR
OK appears on the screen. The video from the camera will
then appear.
NOTE
A camera can only be registered to one Parent Unit at any one
time.
22
del/
add/
+
will pop up, press the + UP button or -
is
view/
scan menu
+
Parent Unit Menu Options
add,