Table of Contents
Advertisement
NOTE
You cannot delete the camera if it is the only camera paired in the system.
4.5.4
Scan the cameras
1. Press the
-
2. Press the
DOWN button to select the VIEW CAMERA icon
press the
3. The screen will then display images from each registered cameras in a
loop, changing about every 10 seconds.
TIP
Quick Method to View Cameras instead of using the menu.
Directly press
NOTE
If the owner unit is in scan mode and one of the registered cameras is turned off
or out of range, the scan will stop at the missing camera
(e.g. camera) and display the
8 seconds.
WARNING
Check the camera and correct the fault immediately if you are using that
camera to monitor your pet.
If you want to continue in camera scan mode without that camera, delete the
camera (see 4.5.3 Delete a camera) and start the scan again.
Owner Unit Menu Options
button and the first menu option will appear.
button to confirm. Choose the
repeatedly to select
3 ?
symbol for scan selection.
Camera 1- 4
or
.
icon while emitting a warning beep every
and
15
Advertisement
Table of Contents
