SEM Model 0202 OMD Product Operation And Maintenance Procedure page 8

PRODUCT OPERATION & MAINTEANCE PROCEDURE
Model 0202 OMD
In the event of a jam, the unit will automatically go into reverse mode and then forward again for
several seconds to try and clear the jam. The symbols below are the indicators for a Jam and Auto
clearing of the jam.
If the jam cannot be automatically cleared, the user may manually Reverse the unit. Depressing the
Reverse button will make the unit run in the reverse direction for about 1.5 seconds. The single
direction indicator arrow now shows the Reverse direction.
For NATIONWIDE SERVICE call (800) 225-9293
8