Advertisement
SPARE PARTS LIST FBS-950
FERM NR.
DESCRIPTION
409232
CARBON BRUSH (SET)
409233
ADJUSTING KNOB (SET)
409234
REAR WHEEL
409235
BOTTOM PLATE
409236
BELT
409237
SWITCH
409238
DUSTBAG
38
POSITION
26
BELT SANDER
28 TILL 30
35
THE NUMBERS IN THE FOLLOWING TEXT
REFER TO THE DRAWINGS ON PAGE 2
48
49
SAFETY AND OPERATING INSTRUCTIONS
61
-
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Operation
4. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
Voltage
Frequency
Power input
No load sander paper speed
Sanding belt size
Sanding pad size
Weight
Lpa (Sound pressure)
Lwa (Sound power level)
Vibration value
PRODUCTINFORMATION
Fig. A + B
The belt sander is the perfect tool to sand wood and to
grind iron, plastic or similar materials.
The belt sander must be used for the rough work, for the
normal sanding work an orbital sander must be used.
1. Rear handle
2. Front handle
3. Front belt roller
4. Clamping lever
5. Direction indicator
6. Cover carbon brush
7. On/off switch
8. Blocking switch
9. Dust collection opening
10. Dust bag
11. Drive belt cover
12. Adjusting knob aligning sanding belt
13. Sanding belt
Ferm
Ferm
For your own safety and for the safety of others,
please read these instructions carefully before
| 230 V~
| 50 Hz
| 950 W
| 370m/min
| 75 x 533 mm
| 75 x 150 mm
| 3.7 kg
| 94 dB(A)
| 170 dB(A)
| 2.4 m/s
2
PACKAGE CONTENTS
1
Belt sander
3 Sanding belts
1 Dust collection bag
1 Instruction manual
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for
transport damage.
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
Read instructions carefully
In accordance with essential applicable safety
standards of European directives
Class II machine – Double insulation – You don't
need any earthed plug.
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Indicates electrical shock hazard.
Wear a dust mask. Working with wood, metals
and other materials may produce dust that is
harmful to health. Do not work with material
containing asbestos!
Wear eye protection.
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
ELECTRICAL SAFETY
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Always check that the power supply corresponds to
the voltage on the rating plate.
The machine is double insulated in accordance
with EN-50144; therefore no earth wire is
required.
3
Advertisement
