The Ferm FCS-180 Combisander is a versatile machine with which you can easily sand large surfaces, corners and even round or small parts. The Combisander can be used to sand wooden and metal surfaces.
SPARE PARTS LIST FCS-180 OPERATIONAL SAFETY Avoid unintentional starting Do not carry plugged in tools with your finger on the Warning! Be aware this sander can produce fine dust, switch. Check that the switch is off before plugging in to REF.NR.
Ensure the sander is switched off and the plug is removed from the mains socket. The Ferm combination sander can sand flat areas, corners, round or small parts. Included in the kit is a metal scraper, ATTACHING THE TRIANGULAR SANDING...
Finish by putting the flat side on the stone and rubbing kee- Keep your hands away from the sanding heads and ping the flat side in contact with the stone. work area. Ferm Ferm...
Page 6
Check the mains lead and the fuse/plug. Fit a 3-amp fuse. If a 13amp (BS1363) plug is used a (BS • Take to your Ferm Dealer for repair 1362) ASTA approved 3-amp fuse must be fitted. The motor is defective...